NOVUS AUTOMATION
10/48
5.1.1.2
RHT
Climate
TRANSMITTER (DM MODEL)
Fig. 16
shows the flange dimensions and perforation:
Fig. 16
- Flange for mounting
DM
model
The rods for these models are made of stainless steel, with lengths of
150
,
250
or
400 mm
.
Fig. 17
– Dimensions of
DM
model
5.1.2
REMOVING AND INSTALLING THE FRONT COVER
To remove the front cover, insert a screwdriver. It is necessary to fit in the lateral handles and to force it lightly until realizing its release. The
procedure should be repeated on each of the side handles of the device, as shown in the figures below. With all sides clear, the cover can be easily
removed:
Fig. 18
- Removing the front cover of the transmitter
Fig. 19
- Removing the front cover of the transmitter
To install, fit the cover onto the base by pressing it with care to fully secure the transmitter, as shown in the figure below:
Fig. 20
- Device cover fitting
