Novatel DL-V3, Справочное руководство

Страница: 59 / 116

DL-V3 Commands Chapter 2
DL-V3 Firmware Reference Manual Rev 2 59
2.31 PROJECT Add or Clear a Project
The project command allows you to add or clear a project. If a project has been added via the project
command prior to issuing a groupuse start command, a projectdefb log is automatically logged to the
default group destination by the groupuse start sequence.
Project add defines a project with parameters project , agency and observer .
Project clear undefines a project, and prevents the projectdefb log from being logged to the default
group destination by the groupuse start sequence.
Syntax
project add project [ agency [ observer ]]
project clear
Message ID = 211
Table 40: Project Action
Table 41: PROJECT Default Configuration
Field Data
Value Used if
Not Specified
Bytes Format Units Offset
1 Header - - - 0
2 Project Action, see Table 40 - 4 Enum none H
3 Project - 32 Char[] none H+4
4 Agency NUL 32 Char[] none H+36
5 Observer NUL 32 Char[] none H+68
Binary Value ASCII Value Description
0 ADD Add a new project into the PDC (default)
1 CLEAR Clear projects from the PDC
Parameter Power-On Freset Stored in NVM
project clear clear NO