Novatel DL-V3, Справочное руководство

Страница: 43 / 116

DL-V3 Commands Chapter 2
DL-V3 Firmware Reference Manual Rev 2 43
groupuse stop
•
N/A
Message ID = 318
Table 26: GROUPINTERFACEMODE Default Configuration
Field Data
Value Used if
Not Specified
Bytes Format Units Offset
1 Header - - - 0
2 Parameter Update, see Table 23 on
Page 41
- 4 Enum none H
3 Group name - 12 Char[] none H+4
4 Serial Port Identifier, see Chapter 3,
Table 55 on Page 76
NO_PORT 4 Enum none H+16
5 rx_type – Serial Port Interface
Mode, see
Table 58 on Page 77
NOVATEL 4 Enum none H+20
6 tx_type – Serial Port Interface Mode,
see
Table 58 on Page 77
NOVATEL 4 Enum none H+24
7 Responses
0 = Off
1 = On
ON 4 Enum none H+28
Parameter Power-On
Freset
a
a. The AUX port automatically changes configuration to NONE, NONE
when the POWERUP group is run unless the GROUPINTERFACEMODE
command was issued manually for AUX.
Stored in NVM
COM1 RX type no change NOVATEL YES
COM1 TX type no change NOVATEL YES
COM1 responses no change ON YES
COM2 RX type no change NOVATEL YES
COM2 TX type no change NOVATEL YES
COM2 responses no change ON YES
AUX RX type no change NOVATEL YES
AUX TX type no change NOVATEL YES
AUX responses no change ON YES