Nova Electronics MR210AU, Руководство пользователя

Страница: 21 / 67

- 16 -
Display Setting Range Default
Post Timer 1
Post Timer 2
Post Timer 3 1
～
65535 (Unit: msec)
1 ～ 65535
1
～
65535
10
100
1000
■ Home Search Low Speed
Sets search speed for step 2, step 3 of home search.
Display Setting Range Default
Home Search Low Speed 1 ～ 8000 20
Actual speed is the value which multiplies the setting value by speed multiplier.
Home Search Low Speed (pps) ＝ Setting Value × Speed Multiplier
[Note] Home search low speed must set smaller value than start speed.
■
Home Search High Speed
Sets search speed for step 1, step 4 of home search.
Display Setting Range Default
Home Search High Speed 1
～
8000 1000
Actual speed is the value which multiplies the setting value by speed multiplier.
Home Search High Speed (pps) ＝ Setting Value × Speed Multiplier
Home search high speed usually sets larger value than start speed to perform acceleration/deceleration driving.
■
Home Search Offset
Sets offset drive for home search. If 0 is set, offset drive is not performed.
Display Setting Range Default
Home Search Offset
－
8388608
～ ＋
8388607
＋
100
This value depends on pulse scale numeration/denomination. This range is for when pulse scale numeration/denomination is
1000/1000.
■
Software Limit +
Sets the value of Software Limit for + direction.
Display Setting Range Default
Software Limit
＋ －
8388608
～ ＋
8388607
＋
8388607
This value depends on pulse scale numeration/denomination. This range is for when pulse scale numeration/denomination is
1000/1000.
To function Software Limit, “Software Limit” must be enabled in mode setting. For more details, see “Software Limit” of
chapter 3.1 “Mode Setting”.
■ Software Limit –
Sets the value of Software Limit for –direction.
Display Setting Range Default
Software Limit － － 8388608 ～ ＋ 8388607 － 8388607