- 35 -
Click OK, and the operating program starts in “Off Line”. Select either MR210A or 220A, and main screen appears.
[Note]
When the operating program is first started after installation, it may be offline mode occasionally even though the cable is
connected. In this case, click
Option
menu on the upper left of the main screen, then check (V)
COM
option connected with the
motor control unit, then exit the operating program and restart it.
When connecting with the USB cable, click Control Panel
→
System
→
Hardware tab
→
Device Manager, the user can find
the COM port number after USB device driver name (“USB to Serial Port”) under Ports (COM & LPT).
6.2 Main
Screen
When starting the operating program, the following main screen appears. In this screen,
●
Jog mode for each axis (Scan, Continuous, Preset)
●
Home search, Index driving, Program execution
●
Save and Load of Operating mode, Parameters and Program files
the user can perform operations as above.
②
Jog Mode Select
③
Drive Speed Select
④
Jog Operations
⑥
Program Execution
⑤
Home Search Execution
①
Connection Status
⑦
Drive Status
⑩
File control, Connection settings and Help
⑧
Open Subscreens
⑨
Current Position Set
⑪
MR210A/220A Reset
