- 4 -
2.
Setup Operating Program
The operating program is the tool to write driving parameter mode or driving programs from PC to MR210AU/220AU. The
accessory CD-ROM contains the operating program, which is composed of three directories as follows:
・
InstMS Folder -------- Installer for OS before Windows XP.
・
MRPRG Folder -------- MR210AU/220AU Operating program
・
Driver Folder ------- USB device driver
The latest version is available on our web site:
http://www.novaelec.co.jp/eng/index.html
.
First install the operating program from MR200 Series CD-ROM according to chapter 2.1. Then, to make connection with the
motor control unit, if using USB communication, follow steps in chapter 2.2. If using RS232C communication, follow steps in
chapter 2.3.
2.1
Operating Program Installation
2.1.1
Operating Program Installation
(1) Insert MR200 Series CD-ROM into the CD drive.
[Note]
Do not connect MR210AU/220AU and your PC at this time. Although the user can install while being connected, if using
the USB cable, operating system will ask for the driver in the first connection. In this case, the user should install the USB device
driver in advance according to chapter 2.2.1.
(2) Windows 2000 users: double-click the installer to build on your hard disc.
Windows 2000 users ------ Execute
InstMsiW.exe
in InstMS folder.
Windows XP users don't need to do anything for this step.
(3) Double-click
MR220A.msi
program file in MRPRG folder. In a while, setup screen will be invoked and then installation will
start. Follow the on-screen instructions below.
(4) When the Setup Wizard appears, click
Next
.
