manualshive.com logo in svg

Nortel Meridian M1250, Руководство пользователя, Страница: 81 / 168

Поделиться
Скачать
Nortel Meridian M1250 Скачать руководство пользователя страница 81

• • • • 75 • • • •

Basic call processing

1

If the telephone is idle,
the telephone is rung. 

If the telephone(s) have
displays, the display (s)
are updated.  

 

If the display on the 
originating telephone  is 
updated when the call  is 
answered, the Call
Forward/Hunt Override
FFC will no longer be
displayed.

If the dialed telephone
is busy, and Hunt is active,
the calling party will
terminate on the wanted
telephone and will receive
a busy signal.

If the dialed telephone is 
idle, but does not answer
within the defined number
of ringing cycles for Call
Forward/No Answer, the call 
is not forwarded (that is, 
it continues to ring).

If the dialed telephone is
busy, the attendant can
activate Camp-On, if Camp-
On is applicable. In addition,
Ring again can be placed
against a telephone for which
Call Forward/Hunt Override
was used an a busy telephone
was encountered. 

 

 

Dial the FFC for
Call Forward/
Hunt Override
and the DN of the
wanted party.

Call Forward/Hunt Override

Содержание Meridian M1250









































































































































































Отзывы:

Нет отзывов