Nortel Meridian M1250 Скачать руководство пользователя страница 135

Страница: 135 / 168

• • • • 129 • • • •

Automatic Wake-Up

Unanswered wake-up calls

If a guest does not respond to the first wake-up call, the system makes up to two more attempts at
5-minute intervals. If the guest does not answer after the third call, the system, if set for this option,
notifies you of an unanswered wake-up call.

Note:

When you are notified of an unanswered wake-up call, you may call the room again.

A guest has not
responded to three
wake-up calls.

You hear a continuous
buzz. The A. wake up
indicator flashes quickly.
The extension number of
the room that has failed to
respond is displayed.

To cancel the
notification, press A.
wake up.

The buzz stops. The A.
wake up indicator goes
off.

Press RLS.

The RLS indicator goes
on; you are free to process
other calls.

Содержание Meridian M1250








































































































































































Результаты поиска

Содержание Meridian M1250

Отзывы:

Nortel Meridian M1250, Руководство пользователя, Страница: 135 / 168

Результаты поиска

Содержание Meridian M1250

Отзывы: