Nortel Meridian M1250 Скачать руководство пользователя страница 62

Страница: 62 / 168

• • • • 56 • • • •

Basic call processing

Trunk-to-trunk call

A user, while outside the system, may call to request access to an outgoing trunk.

Note:

If neither of the trunks involved in the call has answer supervision, the call is automatically

held on the lpk key. When both parties hang up, the S and D indicators remain on. Press the lpk key

and then RLS src. and RLS dest. and RLS again.

You answer an incoming

unk call and the caller

quests access to an

utgoing trunk. Dial the

runk access code, then

dial the requested
number.

The excl. src. indicator

goes on during dialing.

ou hear dial tone after

dialing the trunk access

ode, and ringing after the

number. The

indicator

goes on steadily.

hen the called party

answers, you may talk

privately.

The D indicator remains

on. The excl. src. indicator
remains on.

Press RLS to connect the
calling and called parties.

The RLS indicator goes

n; you are free to process

calls on other loop keys

(see Note).

Содержание Meridian M1250








































































































































































Результаты поиска

Содержание Meridian M1250

Отзывы:

Nortel Meridian M1250, Руководство пользователя, Страница: 62 / 168

Результаты поиска

Содержание Meridian M1250

Отзывы: