manualshive.com logo in svg

Nortel Meridian M1250, Руководство пользователя, Страница: 18 / 168

Поделиться
Скачать
Nortel Meridian M1250 Скачать руководство пользователя страница 18

 

• • • • 12 • • • •

 

Introduction

 

Remote

The call is from a remote location and has been routed over a release link 
trunk. This indicator appears only on consoles equipped with 
Centralized Attendant Service (CAS) features.

Fully Restricted

The call is from a fully restricted extension. A person using a fully 
restricted extension can place calls to, and receive calls from other 
extensions and the attendant. A fully restricted extension is denied 
access to all incoming and outgoing trunk lines. Incoming calls for a fully 
restricted extension come to the attendant, who then extends them. 

Unrestricted or Semi-restricted

The call is from an unrestricted or semi-restricted extension. An 
unrestricted extension user can place and receive all types of calls. A 
semi- restricted extension user can place calls to other extensions, and 
can place calls to the public network with the assistance of the attendant. 

Tie

The call is on a Tie trunk. 

Wide Area Telephone Service

The call is on a Wide Area Telephone Service (WATS) trunk.

remote

rest "0"

"0"

tie

wats

Содержание Meridian M1250









































































































































































Отзывы:

Нет отзывов