manualshive.com logo in svg

Nortel Meridian M1250, Руководство пользователя, Страница: 166 / 168

Поделиться
Скачать
Nortel Meridian M1250 Скачать руководство пользователя страница 166

 

• • • • 160 • • • •

 

Supervisory features

Calling an attendant

 

As supervisor, you can call an attendant in your group, unless their console is in position-busy mode.

 

Note 1:

 

If you dial an incorrect attendant code, you hear a fast busy signal and the S indicator 
remains off. Press RLS src.

 

Note 2:

 

If the called console is busy, you hear a busy signal and the S indicator continues to flash 
slowly. Press RLS.

 

Note 3:

 

If  the called console is in night-service mode, your call cannot be completed. You hear a 
fast busy signal and the S indicator remains off. Press RLS dest.

 

1

 

Once in position-busy 
mode, press an idle lpk 
key.

The lpk indicator goes on.

 

2

 

Dial the attendant access 
code.

 

3

 

Dial the appropriate 
attendant codes.

You hear ringing. The S 
indicator flashes slowly.

 

4

 

The called attendant 
answers. Press RLS 
when you wish to end the 
call.

Ringing stops. The S 
indicator goes on steadily. 
The RLS indicator goes 
on; you are free to process 
other calls.

Содержание Meridian M1250









































































































































































Отзывы:

Нет отзывов