manualshive.com logo in svg

Nortel Meridian M1250, Руководство пользователя, Страница: 37 / 168

Поделиться
Скачать
Nortel Meridian M1250 Скачать руководство пользователя страница 37

 

• • • • 31 • • • •

 

Introduction

The Options menu (M2250 only) (2 line display)

 

The Options menu when People’s Republic of China, Taiwan, or Korean languages are 
selected.

 

When P.R.C. Taiwan, or Korean languages are selected, the Options menu will be shown in 2-line 
mode only.

The options menu on the M2250 gives you the opportunity to set a number of display and console 
features to suit your preferences. It offers these choices:

— set display contrast
— set buzz tone
— set language
— set time and date format
— set key clicking
— set calls waiting options

While the Options menu is being used, the console puts itself in Position Busy mode, so that no calls 
interrupt you. In Position Busy mode, calls that would normally ring at your console are directed to other 
consoles. If yours is the only console, the system goes into Night Service.

 

Opening the Options menu

 

To open the Options menu, press SHIFT and  

. You see the menu on the display screen, which 

looks like this: 

The (1–6) on the first line of the display tells you there are six items in the menu. Press * to see the 
additional menu items. Pressing * repeatedly will step you through all the menu items.

OPTIONS MENU: (1–6)

<#> EXIT

1. CONTRAST

2. BUZZ TONE

<*> MORE

OPTIONS MENU: (1–6)

<#> EXIT

3. LANGUAGE

4. DISPLAY

<*> MORE

OPTIONS MENU:  (1–6)

<#> EXIT

5. KEYCLICK

6. CW

<*> MORE

Содержание Meridian M1250









































































































































































Отзывы:

Нет отзывов