Nortel Meridian M1250, Руководство пользователя, Страница: 141 / 168

• • • • 135 • • • •
Centralized Attendant Service (CAS)
Putting a call on silent hold
When one call is already camped onto a busy extension and a third caller wishes to wait for a connection,
you can put the third caller on silent hold until camp-on becomes possible. You are automatically recalled
by the caller after a set time.
Note:
When you place a call on silent hold, the release link trunk (RLT) is held at the remote location.
When you use HOLD, the RLT is held at your location.
1
The caller wishes to wait
for a connection but
cannot be camped onto
the busy extension.
Press .
You hear dial tone from
the remote location; the
caller hears nothing. The
remote ICI, lpk, and S
indicators are on.
2
Dial the silent hold code. You hear four to six
beeps.
3
Press RLS to put the call
on silent hold. The RLS indicator goes
on; you are free to process
other calls.
4
When recall occurs,
check if camp-on is
possible. If not, either
put the call back on silent
hold (steps 2 and 3) or
end it by pressing RLS
dest. and then RLS.
C/H