Nortel Meridian M1250 Скачать руководство пользователя страница 55

Страница: 55 / 168

• • • • 49 • • • •

Basic call processing

Timed recall from an unanswered parked call

A parked call, if unanswered, is returned to you after a set time.

You receive a timed
recall from an

unanswered parked call.
Press the lpk key beside
the flashing S and slowly
flashing D indicators.

The tone stops and the lpk

and S indicators go on
steadily; you are
connected to the

caller.The recall ICI, and
call park indicators are on.

If the caller wishes to
remain parked, press

RLS. The call is parked
on the original call-park

number.

The RLS indicator goes

on; you are free to process

other calls.

If the caller wishes to end
the call, press RLS dest.,

then RLS.

The call is unparked. The
S indicator goes off and

he RLS indicator goes on;

you are free to process
other calls.

Содержание Meridian M1250








































































































































































Результаты поиска

Содержание Meridian M1250

Отзывы:

Nortel Meridian M1250, Руководство пользователя, Страница: 55 / 168

Результаты поиска

Содержание Meridian M1250

Отзывы: