Nortel Meridian Companion, Руководство по установке и обслуживанию

Страница: 96 / 218

Page 86 of 206 Programming the Meridian Companion system
553-3601-220 Standard 4.00 November 1998
Changing PCM modes
1. Press
ƒ••‚
and enter the Installer password.
2. Press
^
. The display shows
1. Telephony Data
.
3. Press
^
, then
*
until the display shows
PCM mode
4. Press
CHANGE
to switch between
Mu Law
and
A Law
. The last value
displayed is automatically set.
5. If the value hasn’t changed, press
*
to continue Mobility data.
If the value has changed, a warm reset is required. Press
APPLY
. The
display shows
Warm Reset?
.
6. Press
RESET
to begin warm reset.
Note: CANCEL does not save the change and does not initiate a warm
reset.
WTN
With X11 release 24 and the MC32 feature (package 350), the number of
wireless terminals per card can be changed from 16 to 32.
Changing the number of wireless terminals per card
1. Press
ƒ••‚
and enter the Installer password.
2. From
A. Configuration
, press
^
. The display shows
1. Telephony Data
.
3. Press
^
, then
*
until the display shows
16 WTN
or
32 WTN .
4. Press
*
to continue in telephony data if the number of wireless
terminals per card is correct, or press
CHANGE
until the correct number
of wireless terminals per card is displayed (either
16 WTN
or
32 WTN
).
5. Press
APPLY
when the correct number of wireless terminals per card is
displayed. The display shows
Warm Reset?
.
6. Press
RESET
to save the change and begin a warm reset.
Note:
CANCEL
does not save any of the changes and does not initiate a
warm reset.