Nortel Meridian Companion, Руководство по установке и обслуживанию

Страница: 138 / 218

Page 128 of 206 Maintenance
553-3601-220 Standard 4.00 November 1998
Card Status
The Card Status feature enables you to check the card type and state and
perform card level maintenance actions.
1. Press
ƒ••‚
and enter the Installer password.
2. From A. Configuration , press
*
until the display shows
C. Maintenance
.
3. Press
^
, then press
*
until the display shows
2. Card Status
.
4. Press
^
. The display shows
Show card
.
5. You can enter a number or press
^
to see the first card. The
display shows Cnn: followed by the card type: CMCC , CMRC , CMLC, or
CMBC
.
6. Press
^
to see the firmware version of the current card.
7. Press
STATE
to see the card state described in Table 34.
Note: Pressing
TYPE
at any point resets the display to show the card
number and type, as indicated in step 5.
8. Press
*
and
&
to view other cards.
9. Press
®
to exit, or
%
to continue in Maintenance
programming.
Note: The card can be disabled if the state is
Busy
,
Failed
,
Idle
, or
Wait Idle . Pressing DSBL shows the question Disable at
once?
on the display. You can select either
YES
(the card enters
the
Disabling
state), or
CHANGE
(you are asked whether to
disable upon idle; a YES response places the card in the Wait
Idle
state).
Table 34 : Card states and actions
State Meaning Possible action
Idle
card is enabled but not in use
TYPE
Enabling
card is being enabled
TYPE