Nortel Meridian Companion, Руководство по установке и обслуживанию

Страница: 100 / 218

Page 90 of 206 Programming the Meridian Companion system
553-3601-220 Standard 4.00 November 1998
If the LID entered is not valid, the display shows
LID not changed
. Go
back to step 5 and repeat the process.
10. Record the new LID in Meridian Companion Programming and
Provisioning Record.
11. Press
®
to exit or press
%
to continue in Configuration
programming.
Programming the system time and date
The Meridian Companion system maintains its own time and date rather than
using the Meridian 1 time and date. It is important that the time and date be
correct for event and alarm messages.
An idle Administration Terminal displays the current system time and date
when it is functioning properly. Portable telephones do not display time and
date.
Program the time and date as soon as the system is operating, and adjust the
time and date whenever necessary. The time should be reset after the yearly
switches to and from daylight savings time so that system messages have the
correct time and date. It is also necessary to reprogram the time (and other
settings) if the CMCC has been powered down for maintenance or for any
other reason.
Programming the system time
1. Press
ƒ••·
and enter the Administration password. The
display shows
1. Registration
.
2. Press
*
until the display shows
3. Time and Date
.
3. Press
^
. The display shows
Time
and the current setting.
4. Press
CHANGE
. The display shows
Hour:
. If you do not want to change
the hour, go to step 7.
5. Press
CHANGE
. The display shows
Hour:
.
6. Enter the hour in 12- or 24-hour format, as one or two digits. (The
Administration Terminal displays the time in 12-hour format.)