Nortel Meridian Companion, Руководство по установке и обслуживанию

Страница: 111 / 218

Verifying a Meridian Companion installation Page 101 of 206
Meridian Companion Installation and Maintenance Guide
All radios present on the system should now be assigned to a cell. If any radios
are not assigned to a cell, check the Event/Alarm log to see if any Base Stations
appear defective. Replace if necessary and repeat the reevaluation.
Check to make sure that Base Stations have been clustered into cells as
indicated in the site plan. Add cell numbers and Base Station TCM addresses
to the site plan. If there are inconsistencies, check the wiring to make sure that
Base Stations are wired to the correct port, that the installation matches the
deployment plan, and the site has not changed since the site deployment.
1. Enter Configuration programming.
2. Press
^
. The display shows
1. Telephony Data
.
3. Press
*
. The display shows 2. Mobility Data .
4. Press
^
, then
*
until the display shows Cells .
5. Press
^
, then
*
until the display shows
Show cell:
.
6. Enter the three-digit number of the first cell to be verified. (You can use
BKSP
to correct typing mistakes.)
The display shows
Cxxx radios
.
7. Press
^
. The display shows either
No radio
or
ccuun asgnd
.
8. Press
*
to see the next radio. Continue pressing the arrow to
search through the radios.
9. Press
®
to exit or
%
to continue.
Identifying a radio’s cell assignment
To identify a radio’s cell assignment:
1. Enter Configuration programming.
2. Press
^
then
*
until the display shows 2. Mobility
Data
.
3. Press
^
. The display shows
Re-Evaluation
.
4. Press
*
. The display shows
Radios
.
5. Press
*
. The display shows
Show radio:
.