Nortel Meridian Companion, Руководство по установке и обслуживанию

Страница: 93 / 218

Programming the Meridian Companion system Page 83 of 206
Meridian Companion Installation and Maintenance Guide
value represents a gain; a negative value represents a loss. If a value outside
the valid range is entered, the closest valid value is used.
Adjusting gain values
1. Press
ƒ••‚
and enter the Installer password.
2. From
A. Configuration
, press
^
. The display shows
1. Telephony Data
.
3. Press
^
, then
*
until the display shows
B03 Gain Values
.
4. Press
^
. The display shows
PBX - CPP:
followed by the
current value.
5. Press CHANGE to enter a new value.
6. Press +/- to indicate a negative or positive value.
7. Enter the digits. Remember that digits appear without decimal points.
Press
BKSP
to make corrections. Press
OK
when you have entered the
value.
8. Press
*
to search for the next signal path.
9. Press
®
to exit or press
*
to continue setting programming
features.
Portable telephone side tone
This option enables (you can hear your own voice when using the portable) or
disables (you cannot hear your own voice when using the portable) the side
tone. The default setting at installation is
On
(side tone enabled). This is the
proper setting for most installations. If required, you can change the setting by
following this procedure:
1. Press
ƒ••‚
and enter the Installer password.
2. From
A. Configuration
, press
^
. The display shows
1. Telephony Data
.
3. Press
^
then
*
until the display shows
Side tone:
.
4. Press
CHANGE
to switch between
On
(side tone enabled) and
Off
(side
tone disabled).