Nortel Meridian Companion, Руководство по установке и обслуживанию

Страница: 105 / 218

Programming the Meridian Companion system Page 95 of 206
Meridian Companion Installation and Maintenance Guide
1. Press
ƒ••·
. The display shows
Password:
.
2. Enter the Administration password. The display shows
1. Registration
.
3. Press
*
until the display shows
4. Passwords
.
4. Press
^
. The display shows
Admin. password
.
5. Press
*
. The display shows
Reg. password
.
6. Press
CHANGE
. The display shows
New pswd:
.
7. Enter a new one- to six-digit Registration password. Use
BKSP
for
corrections.
8. Press
OK
. The display shows
Re-enter:
.
Note: If you do not enter any digits and press OK , the display shows
Pswd not changed
.
9. Reenter the digits and press
OK
. The display shows
Password changed .
If the display shows Pswd not changed , you did not enter the same
password again. Go back to step 6.
10. Record the new Registration password in Meridian Companion
Programming and Provisioning Record.
11. Press
®
to exit or press
*
to continue in Administration
programming.