Nortel Meridian Companion, Руководство по установке и обслуживанию

Страница: 191 / 218

Troubleshooting Page 181 of 206
Meridian Companion Installation and Maintenance Guide
You should rarely see event messages other than those described in Table 42
and Table 43. Other messages occur when the Meridian Companion system
has followed its normal recovery from an unusual combination of system
EVT850
Synchronization error.
EVT851
This is a Base Station software diagnostic message.
EVT882
A reevaluation has been initiated. It precedes the
Re-eval in prog
alarm
in the Event/Alarm log.
EVT887-01091
The reevaluation radio configuration software has encountered a
problematic Base Station (on port 01091 in this case).
Table 43 : Event messages in the Administration log
Event code Meaning
EVT220
The Administration log has been cleared.
EVT400
The system has been manually restarted.
EVT412
The Installer password has been changed. The parameter contains the
extension number that changed the password.
EVT413
The Administration password has been changed. The parameter
contains the extension number that changed the password.
EVT414
Someone tried to enter the system with an invalid Installer password.
EVT415
Someone tried to enter the system with an invalid Administration
password.
EVT416
Someone has initiated a Configuration programming session.
EVT417
Someone has initiated an Administration programming session.
EVT419
The system time has been changed by a user.
EVT434
The Registration password has been changed.
EVT440
An invalid software code has been entered.
EVT450
Someone has initiated a Companion Manager session.
Table 42 : Event messages in the Event/Alarm log (continued)
Event code Meaning