Nortel Call Recording, Руководство пользователя, Страница: 41 / 94

September 2007 Configuring the Nortel Call Recording Card
Planning, Installation, and Administration Guide 41
If, on first bootup of the card, you cannot log into the shell using the default
user name and password, check that the correct software version is on the
card. This is displayed during bootup, see “Sample bootup sequence” on
page 78.
Figure 7:
Command sequence to assign a static IP address
VxWorks login: crcadmin
Password: crcsecurity
>
> lnIsa_writeSubnetMask “AAA.BBB.CCC.DDD”
value = 0 = 0x0
> lnIsa_progIP “DDD.CCC.BBB.AAA”
value = 0 = 0x0
lnIsa_writeGW “ZZZ.YYY.XXX.WWW”
value = 0 = 0x0
lnIsaIPMethodSet 2
value = 0 = 0x0
You must reset the Card now by either pressing the reset button on the
faceplate or by typing
sysReboot at the command line interface. When the
card restarts, you can test the operation of the network interface by using the
ping command.
ping “mm.nn.oo.pp”,3
mm.nn.oo.pp is another IP address in the network the Nortel Call Recording
Card can access. The number 3 shows that three ping packets are sent to the
other IP address.
The output is similar to the following example:
> ping "47.85.3.41", 3
PING 47.85.3.41: 56 data bytes