manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, Руководство пользователя и справочник команд, Страница: 425 / 430

Поделиться
Скачать
Nortel 5100 Series Release 2.3.3 Скачать руководство пользователя страница 425

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

Software licenses  

„

  425

213455-L, October 2005

SMTPclient license

LICENSE

SMTPclient—simple SMTP client

Copyright (C) 1997 Ralf S. Engelschall, All Rights Reserved.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public 
License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later 
version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the 
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General 
Public License for more details.

You should have received a copy of the GNU General Public License in the file COPYING along with this program; if 
not, write to:

Free Software Foundation, Inc.,
675 Mass Ave, Cambridge,
MA  02139, USA.

Notice, that “free software” addresses the fact that this program is 

distributed

 under the term of the GNU General 

Public License and because of this, it can be redistributed and modified under the conditions of this license, but the 
software remains 

copyrighted

 by the author. Don't intermix this with the general meaning of Public Domain software 

or such a derivated distribution label.

The author reserves the right to distribute following releases of this program under different conditions or license 
agreements.

Ralf S. Engelschall
[email protected]
www.engelschall.com

Содержание 5100 Series Release 2.3.3















































































































































































































































































































































































































































Отзывы:

Нет отзывов