manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, Руководство пользователя и справочник команд, Страница: 318 / 430

Поделиться
Скачать
Nortel 5100 Series Release 2.3.3 Скачать руководство пользователя страница 318

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

318  

„

  Command reference

213455-L, October 2005

/cfg/sys/user

User Menu

The User Menu is used to add, modify, delete, or list Nortel Switched Firewall user accounts, 
and change passwords.

There are three default user accounts which cannot be deleted: 

admin

, 

oper

,  and 

root

. See 

Users and passwords on page 246

 for information about default passwords and privileges. 

Only the Administrator can change the passwords. 

[User Menu]
      passwd     - Change own password
      expire     - Set password expire time interval
      list       - List all users
      del        - Delete a user
      add        - Add a new user
      edit       - Edit a user
      adv        - Advanced User Configuration Menu

Table 49  

User Menu (/cfg/sys/user) 

Command Syntax and Usage

passwd

 

<admin password> <new admin password> <confirm new admin password>

This command lets you change the administrator password. The password can contain 
spaces and is case sensitive. There is no limitation on the number of characters.
Only the 

admin

 user can perform this action. You will be prompted to enter the current 

administrator password. Then, you will be prompted to enter and confirm the new 
administrator password.

expire

 <# of seconds>

This command is used to set password expiration time in seconds. If the value is set to 
zero (the default), password expiration is not activated. After a password has expired, the 
user will be prompted at login to enter the old password once, and the new password 
twice. 

N

OTE

 – 

This command is visible only to users in the admin group, and does not apply to 

the 

root

 user.

list

This command lists all editable user accounts. 

Содержание 5100 Series Release 2.3.3















































































































































































































































































































































































































































Отзывы:

Нет отзывов