manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, Руководство пользователя и справочник команд, Страница: 262 / 430

Поделиться
Скачать
Nortel 5100 Series Release 2.3.3 Скачать руководство пользователя страница 262

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

262  

„

  The Command Line Interface

213455-L, October 2005

Command Line history and editing

Using the CLI, you can retrieve and modify previously entered commands with just a few 
keystrokes. The following options are available globally at the command line:

Table 8  

Command Line history and editing options

Option

Description

history

Display a numbered list of the last 10 previously entered commands.

!!

Repeat the last entered command.

!

<n>

Repeat the 

n

th

 command shown on the history list.

<Ctrl-p>

(Also the up arrow key.) Recall the 

previou

s command from the history list. This can 

be used multiple times to work backward through the last 10 commands. The recalled 
command can be entered as is, or edited using the options below.

<Ctrl-n>

(Also the down arrow key.) Recall the 

next

 command from the history list. This can be 

used multiple times to work forward through the last 10 commands. The recalled com-
mand can be entered as is, or edited using the options below.

<Ctrl-e>

Move cursor to the 

end

 of the command line.

<Ctrl-b>

(Also the left arrow key.) Move the cursor 

back

 one position to the left.

<Ctrl-f>

(Also the right arrow key.) Move the cursor 

forward

 one position to the right.

<Backspace>

(Also the Delete key.) Erase one character to the left of the cursor position.

<Ctrl-d>

Delete

 one character at the cursor position.

<Ctrl-k>

Kill

 (erase) all characters from the cursor position to the end of the command line.

<Ctrl-l>

Redraw the screen.

<Ctrl-u>

Clear the entire line.

Other keys

Insert new characters at the cursor position.

Содержание 5100 Series Release 2.3.3















































































































































































































































































































































































































































Отзывы:

Нет отзывов