manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, Руководство пользователя и справочник команд, Страница: 237 / 430

Поделиться
Скачать
Nortel 5100 Series Release 2.3.3 Скачать руководство пользователя страница 237

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

Upgrading and reinstalling the software  

„

  237

213455-L, October 2005

In this example, version 2.3.3.0 is now operational and survives a restart of the system, while 
the software version previously indicated as 

permanent

 is now marked as 

old

.

7.

Perform a Get Topology operation.

8.

If you use a centralized Check Point license, re-attach the NGX license using Smart-
Update.

9.

Push the Policy to the firewall.

Cluster upgrade

When you have downloaded the software upgrade package, you can inspect its status and 
activate it using the following commands:

1.

Determine which firewall holds the MIP (the firewall with the * in the MIP column).

2.

Login into one of the firewalls with the MIP using the 

admin

 account.

3.

Upgrade the Check Point software on the Management station fro R55 to NGX R60.

4.

Select the version of the Cluster Object in the GUI of the SmartDashboard as R55—NG 
with application Intelligence.

5.

Establish Secure Internal Communications (SIC).

6.

Push the policy.

7.

From the Management Server, change the version of the Check Point Cluster Object 
from R55 to NGX R60.

8.

Verify that both firewalls are running. TIP: Use the /info/clu or info/sum CLI commands.

9.

 Check the current version of the software. 

Verify that the version you downloaded has a status unpacked. 

>> Main# 

/info/summary

IP addr        type    MIP Local cpu(%) mem(%)  op
10.10.1.193    master   *    *    26     42     up
10.10.1.194    master             26     42     up

>> Main# 

/boot/software/cur

Version              Name            Status
-------              ----            ------
2.3.3.0_R60          tdo             unpacked
2.3.1.0_R55          tdo             permanent

Содержание 5100 Series Release 2.3.3















































































































































































































































































































































































































































Отзывы:

Нет отзывов