manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, Руководство пользователя и справочник команд, Страница: 298 / 430

Поделиться
Скачать
Nortel 5100 Series Release 2.3.3 Скачать руководство пользователя страница 298

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

298  

„

  Command reference

213455-L, October 2005

/cfg/sys/adm/web/ssl

SSL Configuration Menu

The SSL Configuration Menu is used to configure BBI access using HTTPS. HTTPS uses 
Secure Socket Layer (SSL) to provide server host authentication, encryption of management 
messages, and encryption of passwords for user authentication. Using SSL with the Browser-
Based Interface is highly recommended for security reasons. By default, SSL is disabled.

In addition to enabling/disabling the HTTPS feature, this menu allows you to set the HTTPS 
port, set SSL version, and access menus for generating SSL certificates.

For more information, see the

 NSF 2.3.3 Browser-Based Interface User’s Guide 

(216383-D)

.

[SSL Configuration Menu]
      port       - Set SSL port number
      ena        - Enable SSL
      dis        - Disable SSL
      tls        - Set TLS
      sslv2      - Set SSL version 2
      sslv3      - Set SSL version 3
      certs      - Certificate Management Menu

Table 32  

SSL Configuration Menu (/cfg/sys/adm/web/ssl) 

Command Syntax and Usage

port 

<HTTPS port number>

This command sets the logical HTTPS port which is used by the built-in BBI web server. 
By default, the web server uses well-known HTTPS port 443. This can be changed to use 
any port number, but should not be set to any port which is being used by other services.

ena

This command enables HTTPS access to the BBI. When enabled, HTTPS access to the 
host IP address is allowed for trusted clients which have been added to the access list 
(see 

Defining the remote access list on page 252

).

N

OTE

 – 

An SSL certificate must be generated using the Certificate Management Menu 

(

certs

) before HTTPS will function.

dis

This command disables HTTPS access to the BBI. This is the default. When disabled, 
HTTPS requests to the host IP address will be dropped.

tls y

|

n

This command enables or disables Transport Level Security (TLS) for SSL.

Содержание 5100 Series Release 2.3.3















































































































































































































































































































































































































































Отзывы:

Нет отзывов