manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, Руководство пользователя и справочник команд, Страница: 303 / 430

Поделиться
Скачать
Nortel 5100 Series Release 2.3.3 Скачать руководство пользователя страница 303

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

Command reference  

„

  303

213455-L, October 2005

level auth|priv

This command is used only when 

usm

 is selected. It is used to specify the desired degree 

of SNMP USM security:

„

auth

: Verify the SNMP user password before granting SNMP access. SNMP information 

is transmitted in plain text.

„

encrypt

: Verify the SNMP user password before granting SNMP access and encrypt all 

SNMP information with the user’s individual key.

USM user names, along with their passwords and encryption keys, are defined in the 
SNMP Users Menu (

/cfg/sys/adm/snmp/users

)

access d|r

This command is used to enable read (r) or disable read (d) access for the read commu-
nity.

events y|n

This command is used to enable or disable sending event messages to the SNMP trap 
hosts. When enabled, messages regarding general occurrences (such as detection of a 
new components) are sent.

alarms y|n

This command is used to enable or disable sending alarm messages to the SNMP trap 
hosts. Alarm messages indicate serious conditions which may require administrative 
action.

rcomm

Displays the current read community value (default ‘public’) and allows you to change 
it. There is no restriction on the input string.

users

The SNMP Users Menu is used to list, add, and remove USM users. When 

usm

 is 

selected as the security model, SNMP access is granted only for user/password combina-
tion that is defined in both the SNMP Users Menu and in the Access List Menu 
(

/cfg/sys/adm/accesslist

).

See 

page 304

 for menu items.

hosts

The Trap Hosts Menu is used to add, remove, or list hosts which will receive event or 
alarm messages.
See 

page 305

 for menu items.

Table 36  

SNMP Administration Menu Options (/cfg/sys/adm/snmp)  (Continued)

Command Syntax and Usage

Содержание 5100 Series Release 2.3.3















































































































































































































































































































































































































































Отзывы:

Нет отзывов