manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, Руководство пользователя и справочник команд, Страница: 270 / 430

Поделиться
Скачать
Nortel 5100 Series Release 2.3.3 Скачать руководство пользователя страница 270

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

270  

„

  Command reference

213455-L, October 2005

host 

This command displays runtime information for the specified Firewall host. Information 
includes CPU usage, hard disk usage of the log partition, and status of important applica-
tions such as web server, Check Point Firewall, SNMP, and Inet server.
To view menu items, see 

page 273

.

monitor

This command displays the monitor menu which provides two commands used to view 
current or historical statistics for system parameters like CPU use, memory use, hard 
disk use, total connections and connections per second (rate), and throughput. Use the 
/info/monitor/curdata command to obtain current data for the parameters. Use the 
/info/monitor/histdata command to obtain historical data on the parameters based on the 
time interval specified by the user.
To view menu items, see 

page 274

.

net

This command displays the current network configuration. This is the same information 
that is displayed using the 

/cfg/net/cur

 command.

To view menu items, see 

page 274

.

fw

This command displays the Firewall status (enabled or disabled). This is the same infor-
mation that is displayed using the 

/cfg/fw/cur

 command.

lic 

<

Firewall

 IP address>

This command displays the current Check Point licenses added from the CLI, BBI, 
Check Point Smart Update, or from the root prompt. Displayed information includes 
host IP address, license expiration date, signature string, and feature string. See also 

Fire-

wall License Menu on page 358

. 

accesslist

This command displays the access rights configured for the cluster. This information is  
similar to the information displayed in the 

/cfg/sys/accesslist/list

. Displays 

the list of enabled hosts/networks accessing the cluster members from the remote sites.

telnet

This command displays the current Telnet configuration settings: enabled or disabled. 
This is the same information available using the 

/cfg/sys/adm/telnet/cur

 

command.

Table 10  

Information Menu (/info)  (Continued)

Command Syntax and Usage

Содержание 5100 Series Release 2.3.3















































































































































































































































































































































































































































Отзывы:

Нет отзывов