manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, Руководство пользователя и справочник команд, Страница: 290 / 430

Поделиться
Скачать
Nortel 5100 Series Release 2.3.3 Скачать руководство пользователя страница 290

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

290  

„

  Command reference

213455-L, October 2005

/cfg/sys/adm

Administrative Applications Menu

The Administrative Applications Menu is used to configure Nortel Switched Firewall remote 
management features such as Telnet, SSH, SNMP, and the BBI. 

[Administrative Applications Menu]
      idle       - Set CLI idle timeout
      telnet     - Telnet Administration Menu
      ssh        - SSH Administration Menu
      web        - Web Administration Menu
      snmp       - SNMP Administration Menu
      audit      - Audit Settings
      auth       - Authentication Menu

Table 25  

Administrative Application Menu (/cfg/sys/adm) 

Command Syntax and Usage

idle 

<CLI time-out period in seconds (300–3600)>

This command sets amount of time that a local or remote CLI session can remain inac-
tive before being automatically logged out. The time period is specified in seconds, from 
300 to 3600. The default is 600 seconds (10 minutes).

N

OTE

 – 

If you make changes to the Firewall configuration and do not apply them before 

the CLI times out, all changes will be lost.

telnet

The Telnet Administration Menu is used to enable or disable Telnet sessions for remote 
access to the Nortel Switched Firewall management CLI.

N

OTE

 – 

Enabling Telnet is not enough to provide access for remote Telnet sessions. The 

Telnet user’s IP address must also appear in the access list (see 

Defining the remote 

access list on page 252

 and 

/cfg/sys/accesslist on page 289

 for details

).

See 

page 292

 for menu items.

ssh

The SSH Administration Menu is used to enable or disable Secure Shell (SSH) for 
remote access to the Nortel Switched Firewall management CLI. This menu is also used 
for generating SSH host keys.
See 

page 293

 for menu items.

Содержание 5100 Series Release 2.3.3















































































































































































































































































































































































































































Отзывы:

Нет отзывов