manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, Руководство пользователя и справочник команд, Страница: 310 / 430

Поделиться
Скачать
Nortel 5100 Series Release 2.3.3 Скачать руководство пользователя страница 310

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

310  

„

  Command reference

213455-L, October 2005

/cfg/sys/adm/audit/servers

Radius Audit Servers Menu

The RADIUS Audit servers menu is used for adding, modifying and deleting information 
about RADIUS audit servers.    

[Radius Audit Servers Menu]
      list       - List all values
      del        - Delete a value by number
      add        - Add a new value      
      insert     - Insert a new value
      move       - Move a value by number

Table 42  

Radius Audit Servers Menu Options (/cfg/sys/adm/audit/servers) 

Command Syntax and Usage

list

Lists the IP addresses of currently configured RADIUS audit servers, along with their correspond-
ing index numbers. 

del

Removes the specified RADIUS audit server from the configuration. Use the 

list

 command to 

display the index numbers of all added RADIUS audit servers.

add 

<IP address> <TCP port number> <shared secret>

Adds a RADIUS audit server to the configuration. Specify the IP address, a TCP port number, and 
the shared secret. The next available index number is assigned automatically by the system.
For backup purposes, several RADIUS audit servers can be added. The NSF contacts the server 
with the lowest index number first. If contact could not be established, the NSF tries to contact the 
server with the next index number in sequence and so on.

Note

: The default port number used for RADIUS audit is 1813.

insert 

<index number to insert at> <IP address of RADIUS audit server to add>

Assigns a specific index number to the RADIUS audit server you add. The index number you 
specify must be in use. RADIUS audit servers with an index number higher than (and including) 
the one you specify will have their current index number incremented by 1. The shared secret 
refers to the RADIUS server password.

move 

<index number to move> <destination index number>

Moves a RADIUS audit server up or down in the list of configured servers. The index numbers 
you specify must be in use. To view all servers currently added to the configuration, use the 

list

 

command.

Содержание 5100 Series Release 2.3.3















































































































































































































































































































































































































































Отзывы:

Нет отзывов