manualshive.com logo in svg

Nortel 5100 Series Release 2.3.3, Руководство пользователя и справочник команд, Страница: 423 / 430

Поделиться
Скачать
Nortel 5100 Series Release 2.3.3 Скачать руководство пользователя страница 423

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference

Software licenses  

„

  423

213455-L, October 2005

Original SSLeay license

Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved.

This package is an SSL implementation written by Eric Young ([email protected]).

The implementation was written so as to conform with Netscape’s SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The 
following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just 
the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except 
that the holder is Tim Hudson ([email protected]).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library 
used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with 
the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the 
following conditions are met:

1.

Redistributions of source code must retain the copyright notice, this list of conditions and the following 
disclaimer.

2.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the 
following disclaimer in the documentation and/or other materials provided with the distribution.

3.

All advertising materials mentioning features or use of this software must display the following 
acknowledgement:

“This product includes cryptographic software written by Eric Young ([email protected])”

The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related.

4.

If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) 
you must include an acknowledgement:

“This product includes software written by Tim Hudson ([email protected])”

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED 
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. 
this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Содержание 5100 Series Release 2.3.3















































































































































































































































































































































































































































Отзывы:

Нет отзывов