Norcold 121X series, Руководство по обслуживанию

Страница: 90 / 100

88
S
ection
10
Figure 10-21 illustrates the back view of
modular water valve assembly found in 121X
IMWD and 1211 IMWD models with ice maker
and water dispenser system.
The label on the side of the assembly lists the
assembly part number, specifications, and
identifies the water dispenser solenoid coil
(colored Blue, 12 VDC) and the ice maker
solenoid coil (colored Red, 120 VAC).
Two 8-32 x 1" hex head screws hold the
extension bracket to the back panel. The
assembly is held on the extension bracket with
two 8-32 x 1" hex head screws.
The valve assembly is supplied water through
a 1/4" compression style fitting, which feeds
both, the water dispenser valve and the ice
maker water valve.
Ice Maker Water Valve
Figure 10-21 and Figure 10-22 illustrate and
provide information on the ice maker water
valve.
Water Dispenser Valve
For information on the water dispenser water
valve refer to Section 11.
AC power connections
to ice
maker
Figure 10-21. — Ice maker and water dispenser
modular valve -Back View.
water in
To remove
Shut-off arm
To install
Figure 10-20. —Shut-off arm removal and
installation.
Invensy
N-86
624516
W1
= 1
2 V
DC
10 W
W2
= 1
20 V
AC
60H
z
15 W
W1
W2
To water dispenser
reservoir
Red solenoid coil
ice maker 120 VAC
8-32 x 1"
screws
Figure 10-22. — Ice maker and water dispenser
modular valve -Skewed side view.
To ice maker
Blue solenoid coil
water dispenser
12 VDC