Norcold 121X series, Руководство по обслуживанию

Страница: 49 / 100

S
ection
6
47
Light/thermistor wire assembly replacement
To replace the light/thermistor assembly:
1. Power off the refrigerator.
2. Detach the thermistor from the fin. Location
is illustrated in Figure 6-3.
3. Remove the light cover.
4. Unplug the light/thermistor assembly
connector from the wire harness.
5. Disconnect the light wires from the light
fixture. See Figure 6-4.
6. Connect the replacement light/thermistor
assembly light wires to the light fixture. See
Figure 6-4.
7. Plug the replacement light/thermistor
assembly connector into the wire harness.
8. Reinstall the light cover.
9. Attach the thermistor to the fin to the second
fin from the right and position it 1 to 1-1/2
inch from the top edge of the fin.
10. Power on the refrigerator.
Light/Thermistor Wire Assembly
The light and thermistor share a modular
connector. Unplugging the connector from
the circuit interrupts power to the light
and disconnects the thermistor from the
temperature sensing circuit.
1 COLD-
9 COLDEST
ON
SET TEMP MODE ON/OFF 1 C OLD -
9 C OLD ES T
Fresh food compartment
Left freezer Right freezer
Left door
Right door
Right light switch
Left light switch
Thermistor location Light
Figure 6-3. —Light, switches, and thermistor location.
Figure 6-4. —Light / thermistor assembly components.
Light bulb
Light fixture
Light cover
Thermistor clip Thermistor
Light power connectors
Wire harness plug