NorAM 65ET T4 FINAL, Руководство оператора

Страница: 71 / 194

NORAM 65ET GRADER
3-17
Op
eration
3
Moldboard and Implement Operation
Saddle Lock Pin (Optional)
To allow grading on banks up to 90° an optional rotating
saddle is available. A hydraulically operated lock pin
(1)
secures the saddle
(2)
to the front module frame. When
released the saddle rotates, allowing the circle and
moldboard to pivot for side grading.
Five positions are available with the center position used
for most types of work. For grading up to a 90° bank, the
saddle should be rotated to the farthest hole
(3)
allowing
the blade and circle to hang from the side of the frame.
The saddle pin is controlled by the Circle Side Shift
Control Lever and Saddle Pin Puller Switch
(4)
, on top of
the console. Push lock button forward and press front of
the switch to change lever to operate the saddle pin.
Move lever forward to unlock the saddle. Move lever
rearward to lock the saddle.
NOTE:
The hole and pin on the saddle are not self-
aligning. Manipulate the blade to rotate the saddle
and allow pin to seat properly.
4