NorAM 65ET T4 FINAL, Руководство оператора

Страница: 31 / 194

NORAM 65ET GRADER
2-21
Gene
ral Informa
tion
2
Component Identification and Locations
Standard Style Control Configuration
NOTE:
Applies to all machines except for machines with the CAT control option.
Implement Control Lever
Lever
(1)
operates the optional front and rear mounted
implements.
NOTICE:
Front and rear mounted implements each have a
lock pin which must be removed manually to raise and lower
the implement, otherwise equipment damage will result.
NOTE:
On machines equipped with front and rear
implements, the lever control changes between front
and rear implements according to the position of the
implement switch.
Side Shift Control Lever
Lever
(2)
shifts the moldboard side to side or, if the blade pitch switch is activated, changes the pitch
of the moldboard.
NOTE:
On machines equipped with hydraulic moldboard tilt, the lever changes between
moldboard side shift and moldboard tilt control according to the position of the blade pitch toggle
switch on top of the steering console.
Circle Rotate Control Lever
Lever
(3)
rotates the moldboard circle.
NOTICE:
Rotating the moldboard can cause contact with
the front tires and the rear module. Use caution at extreme
moldboard angles to prevent damage to the tires or
articulation pins.
Circle Shift Control Lever
Lever
(4)
moves the circle side to side. If the saddle pin
switch is activated, the lever controls the saddle lock pin.
NOTE:
On machines equipped with the adjustable saddle option the lever changes between circle
shift and saddle pin according to the position of the saddle pin switch.
NOTE:
On machines with the adjustable saddle option, the pin and the hole in the saddle do not
self align. Rotate the saddle using the Left Side Moldboard Height Control Lever and Right Side
Moldboard Height Control Lever to align pin and hole in saddle.
1 2
3 4