NorAM 65ET T4 FINAL, Руководство оператора

Страница: 154 / 194

NORAM 65ET GRADER
6-12
Every 500 Hours or 1 Year
1
6
Lubrication and Maintena
nce - CAT Tier 4 Final
Cleaning Primary Air Cleaner Element
NOTICE:
The primary air cleaner element can be used up to six times if the element is properly cleaned
and properly inspected. Replace the primary element at least once a year, regardless of number of
cleanings.
NOTICE:
Take extreme care to avoid damaging air cleaner elements. DO NOT tap or strike air cleaner
element. DO NOT wash primary air cleaner element. Use low pressure 30 psi (207 kPa) pressurized air or
vacuum cleaning to clean primary air cleaner element. DO NOT use air cleaner elements with damaged
pleats, gaskets, or seals.
Inspect air filter element for damage to pleats, seals, gaskets, and outer cover before cleaning.
Replace damaged air cleaner element.
To clean air cleaner element using pressurized air:
NOTE:
When cleaning primary air cleaner filter, always begin with the inside of the filter to
force dirt particles toward the outside.
1. Aim air hose so air flows along length of filter. Follow the direction of the pleats to prevent
damage to filter. DO NOT aim air directly at the face of the pleats.
To clean air cleaner element using vacuum:
1. Clean the inside of the filter with pressurized air prior to cleaning the outside with the vacuum.
2. Vacuum the outside of the filter.
Personal injury can result from air pressure. personal injury can result without
following proper procedure.
When using pressure air, wear a protective face shield and protective clothing.
Maximum air pressure at the nozzle must be less than 30 psi (205 kPa) for
cleaning purposes.