NorAM 65ET T4 FINAL, Руководство оператора

Страница: 58 / 194

1
NORAM 65ET GRADER
3-4
Operatio
n
3
Rollover Protective Structure (ROPS)
Machine Starting Procedure
Preparing to Start Engine
NOTICE:
Never push, tow or coast vehicle to start engine.
Before starting engine:
1. Sit in the operator's seat with seat belt buckled.
2. Ensure Parking Brake is applied.
3. Ensure Transmission Control Lever is in neutral position.
NOTICE:
Turbocharged engines require lubrication at the turbocharger bearings. To allow time for
lubrication, limit engine speed to 1000 rpm for approximately 3-5 minutes before driving machine.
Diesel engine exhaust contains products of combustion which may be harmful to
your health. Always start and operate the engine in a well ventilated area and, if
in an enclosed area, vent the exhaust to the outside.
Start the engine from the operator’s station. Never short across the starter motor
terminals, as this could bypass the engine neutral-start system as well as
damage the electrical system.
Make sure no one is working on, underneath, or close to the machine before
starting the engine or beginning to move the machine. Make sure the area is free
of personnel.
DO NOT use aerosol types of starting aids, such as ether. Such use could result
in an explosion and serious injury.