FORM NO. 56043042 / Whirlamatic
™
2700 / BHS 7014 - 9
BURNISHING SYSTEM
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
PAD DRIVE BELT TENSION ADJUSTMENT
1
See Figure 3. Remove Cover (A).
2
See Figure 4. Release tension on the Idler Pulley (B) by loosening Inner Bolt (C) while holding the Outer Nut (D).
3
Turn outer nut until mark lines up with third line from right (40lbs).
4
Tighten Inner Bolt (C) while holding the Outer Nut (D).
5
See Figure 3. Reinstall Cover (A).
FRONT
A
10
LBS 25
LBS 40
LBS
60
LBS
80
LBS
10
LBS
25
LBS
40
LBS
60
LBS
80
LBS
C
D
B
Set belt tension
at this marker.
FIGURE 3
FIGURE 4
revised 2/02
