FORM NO. 56043042 / Whirlamatic
™
2700 / BHS 7014 - 3
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
General Specifications
English (Metric)
Burnishing Pad Diameter
27 inches (68.5 cm)
Machine Length
81.5 inches (207 cm)
Machine Width
32 inches (81 cm)
Machine Height
46.75 inches (116 cm)
Machine Weight
580 lbs. (263 kg) net w/o batteries
1,300 lbs. (590 kg) w/six 395 AH
Average Coverage Rate
42,970 sq. ft (3,391m
2
) per battery charge
Average Run Time
One hour and fifteen minutes per battery charge
Batteries Recommended
Six 6 volt, 395 A/H @ 20 hour rate,
123 lbs. (56 kg) each
Battery Compartment Size
22 inches (56 cm) long, 24.25 inches (62 cm) wide
17.50 inches (44 cm) high
Battery Charger Recommendation
25 or 36 Amp output, 36 volt charger
Burnisher Pad Motor
36 volt, 6.5 hp, 150 Amp
Wheel Drive Motor
36 volt, 1 hp, 30 Amp
Pad Lift Motor
36 volt, 1/6 hp, 6.7 Amp
Drive System Speed Control
Electronic, fully variable Fwd/Rev
Transport Speed
0 - 4.15 MPH
Turning Radius
47 inches (119 cm) both Left & Right
Wheels
Four non marking, pneumatic,
12.5 inch (32 cm) drive wheels
11.6 inch (30 cm) steer wheels / Air pressure 50 PSI.
Ramp Climbing Ability
10% grade
Sound Level
70 dB (A) @ 3 ft (.9 m) using pad
SPECIFICATIONS
revised 8/00
