Nilfisk-Advance Whirlamatic 2700 BHS 7014, Руководство по обслуживанию

Страница: 6 / 47

FORM NO. 56043042 / Whirlamatic
™
2700 / BHS 7014 - 5
Copyright 2002 Nilfisk-Advance. 1/3/02
Advance Whirlamatic 2700
Rider Burnisher
PM Checklist
Defect Codes
Customer
A
needs adjustment
B binding
Address
C
dirty or contaminated
D damaged, bent or torn
City
St Zip L
leaks
M missing
Model
Serial Hours W worn out
Ref
OPERATIONAL INSPECTION ITEMS
OK
Defect Codes
(circle)
Does
Not
Work
1 Steering A B
2 Drive System Pedal Operation (check for Fwd/Rev drive & any neutral creep) A B D
3 Seat Safety Switch A
4 Brakes (service & parking) A B W
5 Drive System Performance noisy sluggish
6 Burnishing System Deck & Motor Operation (pad deck raise/lower & pad motor auto
functions) A B
7 Burnishing System performance (even shine) A W
8 Emergency Battery Disconnect Control Knob B D
9 Tilt Steering Mechanism and Seat Lever A B
10 Optional Accessories (Headlight, Safety Beacon, Back Up Alarm, Etc.) <----->
11 Battery Charger (auto turn ON & OFF)
12 Main Control Board Special Program Options (Reference SVR Manual 56043042) and
check all applicable program settings. Examples stored error fault codes, diagnostic
SVR test mode, pad pressure settings etc. A
Ref
VISUAL INSPECTION ITEMS
Comments OK
Defect Codes
(circle)
Does
Not
Work
13 Pad Motor Carbon Brushes (check for wear) C D W
14 Wheel Drive Motor Carbon Brushes (check for wear) C D W
15 Pad Drive Belt (wear and tension) A D W
16 Pad Deck Actuator Motor and Pad Drive Deck Levelness A B D
17 Pad Retainer, Pad Driver and Burnishing Pad (check for wear) D M
18 Dust Shroud Assembly Edging and Dust collection Bag D M W
19 Battery Condition (load test, clean & water) D L W
20 Check and Lubricate the following: (1) Steering Universal
Joint, (3) Drive Differential Bearings, (1) Rear Steering
Spindle Bearing, (3) Rear Steering Chain sprocket Bearings
and (2) Rear Wheel Hub Bearings total 10 zerts A B D W
21 Brake Linkage, Caliper and Rotor C W
22 Drive and Steer Chain Tension (adjust & lubricate) A B C W
23 Drive and Steer wheels (thread wear) tire pressure 50 psi A D W
NOTE: For additional service information see service manual form number 56043042 and
operators manual form number 56041380.
WORK COMPLETED BY: ACKNOWLEDGED BY:
Service Technician Signature Date Customer Signature Date
revised 2/02