FORM NO. 56043042 / Whirlamatic
™
2700 / BHS 7014 - 17
WHEEL DRIVE SYSTEM
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
WHEEL DRIVE CHAIN ADJUSTMENT
1
Lift the battery cover.
2
Remove the master link from steering chain and move chain for easier accessibility.
3
See Figure 1. Remove the Electrical Box (A) by removing the two (B) nuts and (C) bolts.
4
See Figure 2. Loosen the three (D) Lock Bolts.
5
Loosen the two (E) Lock Nuts.
6
Turn the two (F) Adjusting Bolts to tighten or loosen the chain. The chain should have approximately 1/4 inch (6.35 mm) total
deflection with moderate pressure applied at the mid-point of the chain.
C
A
B
FRONT
F
E
FRONT
D
D
E
F
Wheel Drive Motor
FIGURE 1
FIGURE 2
revised 2/02
