14
WWW.NILESAUDIO.COM
INSTAllATIoN CoNSIdeRATIoNS CoNTINued...
in-wall power Supply box (powered modelS only)
All Powered Cynema Soundfield models (CSF48A, CSF55A and CSF65A) include one In-Wall Power Supply Box.
The In-Wall Power Supply Box incorporates the Amplifier Module power supply in a flush mounted electrical
box. It includes a removable AC power cord on the front face plate, outside the wall, that plugs into a standard
AC wall outlet.
A 24V DC cable on the rear side, inside the wall, connects to the Amplifier Module that installs in the In-Wall
Mounting System with the Speaker Modules.
The In-Wall Power Supply Box is installed below or directly behind a wall mounted TV next to an AC outlet
(Figure 6 A, B).
A: Located Below the TV
B: Located Behind the TV
IMPORTANT INSTALLTION NOTE:
Because the 24V DC cable provided is limited in length and cannot be spliced or
extended, you must locate the In-Wall Power Supply Box as close as possible to the Amplifier Module.
In some municipalities, conduit is required. For a trouble-free installation, low voltage wire must be in accordance with the National
Electrical Code and any applicable provisions of the local building code. If you are unsure of the correct installation techniques, wire
jacket, or type of conduit to use, consult a professional audio/video installer, building contractor, or the local building and inspection
department.
Figure 6:
In-Wall Power Supply Box
