background image

18

WWW.NILESAUDIO.COM

INSTAllING THe SySTem CoNTINued...

poSition the Speaker moduleS in the in-wall mounting SyStem (all modelS)

The Speaker Modules have small “L” shaped brackets on each side for you to use as an installation aid. 
These “L” brackets enable you to temporarily “hang” the Speaker Modules on the In-Wall Mounting System 
making the speaker connection terminals easy to see and connect. Working within the wall stud placement, 
position the center speaker’s centerline as close to the TV centerline as possible, the right speaker as far to 
the right as possible and the left speaker as far to left as possible. 

1.  Rotate the left and right “L” brackets out to serve as hangers from the In-Wall Mounting System. Hang the 

Speaker Modules in the position that they will be inserted as shown in 

Figure 9

.

connect the Speaker moduleS (all modelS)

1.  Prepare the speaker wire by stripping 1/4”-1/2” from each conductor (see 

Figure 10

). Twist the strands 

or tin the leads with solder to ensure there are no stray strands that could short and possibly harm the 
amplifier.

2.  Attach the stripped wire to the speaker wire terminals of the Speaker Module observing proper positive 

and negative polarity. 

Speaker Module

Left “L” Bracket

Amplifier Module

Figure 9:

 Speaker and Amplifier Module

Figure 10:

  Preparing the speaker  

wire for connection

Содержание Cynema Soundfield



































Отзывы: