17
NILES
– 1-800-472-5555 – 1-760-268-9860
CYNEMA SOUNDFIELD
™
SOUNDBAR SYSTEMS
INSTAllING THe SySTem CoNTINued...
inStall wireS (paSSive modelS)
Speaker Wires:
Route (3) two conductor speaker wires from the AV receiver into the wall and then to each
speaker location utilizing the space between the Screw Down Slide Brackets and the wall stud to route the
wire from one stud bay in the wall into another (see
Figure 8
).
inStall wireS (powered modelS)
Speaker Wires:
Route each of the three supplied two conductor
speaker wires from the amplifier module to the three Speaker Module
locations. Utilize the space between the Screw Down Slide Brackets and
the wall stud to route the wires from one to another (see
Figure 8
). Use
the black/red pair for the right speaker, the black/white pair for the left
speaker and the black/green pair for the center speaker.
power Supply cable:
Route the 24V AC power supply wire inside the
wall from the rear of the In-Wall Power Supply to the Amplifier Module
location using a fish tape or push/pull rod. If necessary, utilize the space
between the Screw Down Slide Brackets and the wall stud to route the
wire from one to another (see
Figure 8
).
TV connection:
Route the supplied Toslink Optical cable or the Stereo 3.5mm to dual RCA Cable or HDMI
cables from the TV to the Amplifier Module. If necessary, utilize the space between the Screw Down Slide
Brackets and the wall stud to route the wires from one stud to another (see
Figure 8
).
external IR Receiver:
In the event that the IR signal to the amplifier module itself is being obstructed or
interfered with, the use of an external IR receiver may be necessary. Route the IR receiver’s wire and 3.5 mm
plug to the Amplifier Module location. If necessary, utilize the space between the Screw Down Slide Brackets
and the wall stud to route from one stud to another (see
Figure 8
).
Auxiliary Audio Source :
Route the supplied Stereo 3.5mm to dual RCA Cable to connect an auxiliary audio
source. If necessary, utilize the space between the Screw Down Slide Brackets and the wall stud to route the
wire from one stud bay in the wall into another (see
Figure 8
).
Niles Wireless Subwoofer Transmitter (Optional):
Route the supplied DC power cable for the wireless
transmitter and a mono RCA audio cable (not supplied) from the Niles SWT location to the Amplifier Module
location. If necessary, utilize the space between the Screw Down Slide Brackets and the wall stud to route the
wire from one stud bay to another (see
Figure 8
).
Figure 8:
Routing Wire
Between Stud Bays
