21
NILES
– 1-800-472-5555 – 1-760-268-9860
CYNEMA SOUNDFIELD
™
SOUNDBAR SYSTEMS
INSTAllING THe SySTem CoNTINued...
inStall the Speaker moduleS (all modelS)
The Speaker Modules snap into the In-Wall Mounting Systems and are held securely in the rails using spring
clips built into the Speaker Module enclosure.
1. Lift the Speaker Module hanging from the In-Wall Mounting System and rotate the “L” brackets on the left
and right back into their original position being careful to make sure they are snapped over the retention
pin to prevent audible vibration.
2. Insert the Speaker Module into the Wall Mounting System by inserting, rotating, and then snapping it in
place as shown in
Figure 14
.
inStall the amplifier moduleS (powered modelS)
The Amplifier Module snaps into the In-Wall Mounting System and is held securely in the rails using spring
clips built into the Amplifier Module enclosure.
1. Lift the Amplifier Module hanging from the In-Wall Mounting System and rotate the “L” brackets on the left
and right back into their original position being careful to make sure they are snapped over the retention
pin to prevent audible vibration.
2. Insert the Amplifier Module into the Wall Mounting System by inserting, rotating, and then snapping it in
place exactly the same way as the Speaker Module is shown in
Figure 14
.
3. Plug the AC Power cord into the face plate of the In-Wall Power Supply Box and into an AC outlet.
Figure 14:
Installing the Speaker Module
A: Insert
B: Rotate
C: Snap In Rails
Figure 13:
Install In Between Covers and Joiners
In Between Covers
In Between Joiner