10
WWW.NILESAUDIO.COM
INSTAllATIoN CoNSIdeRATIoNS CoNTINued...
in-wall mounting SyStem
Note: Be very careful when locating the IN-WALL MOUNTING SYSTEM. Verify all locations behind the wall are
clear of obstructions before cutting into the drywall.
The speaker mounting system requires a rectangular opening in the drywall. See below for dimensions:
MODeL
cuTOuT DIMeNSIONS ( H x W )
cSF48p
3-3/4" x 45-1/4"
cSF48A
3-3/4" x 45-1/4"
cSF55A
3-3/4" x 52-1/4"
cSF65A
3-3/4" x 62-1/4"
A minimum of 3-1/2” depth inside the wall, when measured from the
interior face of the drywall, plus 3” of clearance inside the wall below the
top edge of the bottom mounting rail is required for proper clearance of the
Speaker Module’s Rear Wave Control enclosure
in-wall mounting SyStem
The Cynema Soundfield’s In-wall Mounting System is uniquely designed to install as a single unit across
multiple 16” centered wall studs while being located below, and centered with, a wall mounted flat panel TV.
3.5” (8.9cm)
3”
(7.6cm)
Studs
Grille
Figure 1:
55” Wall Mounting System centered below a TV and shown with Grille