22
WWW.NILESAUDIO.COM
INSTAllING THe SySTem CoNTINued...
Secure the in-wall mounting SyStem (all modelS)
1. Use a cordless screwdriver to firmly tighten the screws on the Screw Down Slide Brackets as shown in
Figure 30 being careful to maintain proper level and alignment and that cabling is not being pinched.
2. Use a handheld screwdriver and tighten the Clamp Down End Brackets as shown in
Figure 15
being
careful not to over tighten.
Figure 15:
Secure the In-Wall Mounting System
painting the grille (all modelS)
The grille can be painted without priming, but the fabric scrim on the back side must first be removed. Use
several light coats sprayed from different sides and angles to cover all surfaces and not fill in any holes. If
you do fill some holes, use compressed air to open them before the paint dries. It may be helpful to dilute
the paint.
inStalling the grille (all modelS)
The Speaker Grille magnetically attaches to the In-Wall Mounting System. Once in place, the grille can be
adjusted 1” to either the left or right to achieve an exact centered position relative to the TV.
1. Place the Speaker Grill on to the In-Wall Mounting System and it will magnetically attach.
2. Slide the grille as much as 1” to the left or right to center it perfectly with the TV (see
Figure 16
).
Figure 16:
Centering the Speaker Grille with the TV
Clamp Down End Bracket
Screw Down Slide Bracket
1”
1”
