13
NILES
– 1-800-472-5555 – 1-760-268-9860
CYNEMA SOUNDFIELD
™
SOUNDBAR SYSTEMS
INSTAllATIoN CoNSIdeRATIoNS CoNTINued...
in-wall mounting SyStem
The Cynema Soundfield In-Wall Mounting System includes two rails that are connected together using up to
four Screw Down Slide Brackets as shown in Figure 2 on page 11.
There will be installations where the right and left end of the rails do not fall directly on a stud. Two Clamp
Down End Brackets are included to secure rail ends that fall 3 or more inches from the nearest Screw Down
Sliding Bracket by clamping the drywall as shown in Figure 2 on page 11.
Special inStallation note:
In some installations the ends of the top and bottom rails will fall too close to the side of a stud to provide the
Clamp Down End Bracket with enough drywall for clamping and, at the same time, not fall close enough to the
stud to use the Screw Down Sliding Bracket (Figure 5, A.).
When this occurs, attach a wood furring strip flush on the side of that stud (Figure 5, B.) and use the Screw
Down Slide Brackets screwed into these furring strips to secure the ends of the rails (Figure 5, C.).
A
B
c
Figure 5:
Stud with a furring strip and Screw Down Sliding Bracket
