Nikon NWL860 Series Скачать руководство пользователя страница 31

Страница: 31 / 96

Chapter 4

Communications Specification

○

Process program (sample file) uploading by host

Message: S7F25,F26

[Host]

[Equipment] <Comment>

Requests formatted process program.

S7F25

→

←

S7F26

Transmits formatted process program data.

3-3-2.

Sample File Downloading

①

The host transmits information to the equipment involving PPID and the size of the sample

file to be transferred.

②

The equipment allows the transfer, if no problems are detected.

③

The host transfers the sample file to the equipment.

④

The equipment checks the sample file and notifies the host of the results.

The sample files must be transferred to the NWL in multi-block data format.

○

Process program (sample file) downloading by host

Message: S7F1,F2,F23,F24,F27,F28

[Host]

[Equipment] <Comment>

Inquires for process program loading.

S7F1

→

←

S7F2

Acknowledges inquiry for process program loading.

Transmits formatted process program.

S7F23

→

←

S7F24

Acknowledges formatted process program.

←

S7F27

Transmits process program verification.

Acknowledges process program verification.

S7F28

→

3-3-3.

PPID List Transmission

The equipment transfers PPID information to the host for all host sample and carrier files.

○

Process program directory request

Message: S7F19,F20

[Host]

[Equipment] <Comment>

Request for current EPPD.

S7F19

→

←

S7F20

Transmits current EPPD data.

3-4.

Carrier File Management

3-4-1.

Carrier File Uploading

The equipment transfers data to the host for the carrier file of the PPID selected by the host.

○

Process program (carrier file) uploading by host

Message: S7F25,F26

[Host]

[Equipment] <Comment>

Requests formatted process program.

S7F25

→

←

S7F26

Transmits formatted process program data.

3-4-2.

Carrier File Downloading

①

The host transfers the sample file to the equipment.

②

The equipment checks the carrier file and notifies the host of the results.

Содержание NWL860 Series

































































































Результаты поиска

Содержание NWL860 Series

Отзывы:

Nikon NWL860 Series, Руководство пользователя, Страница: 31 / 96

Результаты поиска

Содержание NWL860 Series

Отзывы: